iPro Markers

Product Description

iPRO Markers are the most practical solution for marking buried objects or setting lines and boundaries

Once installed in the ground, iPRO Markers help to indicate buried objects (tanks, sprinklers, cables, sensors, etc), show ground hazards and mark out building sites, camp sites etc.

For sports fields, iPRO Markers provide a very practical and cost effective way to mark positions on the playing surface and to display locations for line marking with iPRO Markers clearly visible in the grass. iPRO Markers can be either left in the ground permanently or moved as and when required.

With the provided tools, iPRO Markers are simply knocked or screwed into the ground so that their coloured, synthetic grass tops remain visible. When the grass is next cut, the iPRO Markers are trimmed to the correct level. This means that they are still visible and are level with the length of the grass.

iPRO Markers are available in boxes of 25 with three different installation tools. Available in blue, white, yellow, red and orange. Brush is UV treated.

Frequent Uses:

– Sports Fields

Season after season, the iPRO Markers mark out the playing areas, ensure the precision of the measurements and facilitate the marking of
the lines.

– Construction

Use iPRO Markers to locate buried electrical cables, gas tanks, water pipes. Different colours will show different installations.

– Irrigation

iPRO Markers can be used to mark the exact position of hidden sprinklers on sports fields, golf courses and in parks and gardens.

– Golf

Golf greenkeepers use the iPRO Markers to mark distance to the hole, sprinklers, grounds under repair and hazards.

– Parking lots

iPro markers rapidly show visible spaces.

Planting Instructions:

Inserting Tool –

Manually drive the iPRO Markers 2 cm (3/4’) into the ground
Hold the fibres together and slide them inside the inserting tube
Using a mallet, strike the inserting tool until the ”STOP” line on the tool has been reached
Remove the inserting tool. This will leave 3 to 4 cm of fibres above the ground level
Pour sand between the fibres to fill the empty space just created
The sand will reinforce the iPRO Markers resistance and make it more visible
Gently press the fibres using your foot or the mallet head